Super sej og hårdfør 2WD SHORT COURSE i skala 1/10
- Færdigbygget "Ready To Run" 2WD bil
- Stærkt aluminum TVP chassis design
- Batteri box som passer til NiMH 7,2 og 2S LiPo
- Nem adgang til batteriskifte fra bilens bund
- HPI SC-3SWP2 Waterproof LiPo-ready ESC
- 2.4 GHz radio system
- Oil-fyldte støddæmpere
- Double-wishbone hjulophæng
Leveres komplet køreklar incl.:
4 stk AA batterier
7.2v 2000 mAh NiMH batteri
Klik HER for at se Video med bilen
The Jumpshot SC features a radio box that's protected against the elements, a direct-link steering system with a waterproof steering servo and a strong rear-wheel 2WD drivetrain. A complete set of ball bearings lets you get the most out of every battery pack without losing any power from the brushed motor fitted at the back of the chassis. This means you can blast through any type of terrain you want, whether it's grass, mud, asphalt, gravel or anything else!
EASY TO DRIVE!
The Jumpshot SC is super-easy to drive and get familiar with – all you have to do is plug in the included battery and switch on the radio and car. It’s that easy! To drive the truck, simply pick up the controller with your left hand, put your left index finger into the trigger area, and then put your right hand on the steering wheel – it’s as natural as driving a real car! Turn the wheel to go left and right, and gently pull on the trigger with your left index finger to go forwards. To stop the Jumpshot MT, gently push away from you with your left index finger - hold it there to go into reverse. It takes seconds to get used to this easy operation, and in no time at all you’ll be ripping off jaw-dropping, big-air jumps and stunts!
FULL ADJUSTABILITY AND TUNING POTENTIAL!
The Jumpshot SC drives and performs fantastic right out of the box, however if you want to, it's easy and quick to adjust plenty of settings, exactly like a real monster truck! Adjustments such as ride height, shock angle and more are merely a turn away with your fingers or a wrench if you want to dive under the hood – HPI make it easy to be your own monster truck mechanic AND driver! More complex adjustments such as camber settings can be done with option parts you can get from your RC hobby shop.
REAL OIL-FILLED SHOCK ABSORBERS
The Jumpshot MT is equipped with long-stroke, oil-filled shocks just like you see on real monster trucks! The outside of each shock absorber is threaded so you can quickly adjust the ride height: lower the truck for on-road action, and raise it for big-air stunts!
The Jumpshot MT lets you run in wet conditions because the electronic speed controller and steering servo are fully waterproof, plus the receiver and battery are protected within their special compartments to keep the worst bits of mud and big splashes of water away from them.